STERIS Certified Pre-Owned Equipment AMSCO 400 Medium Sterilizer | STERIS
STERIS Corporation - Helping to provide a healthier today and a safer tomorrow.

STERIS Certified Pre-Owned AMSCO™ 400 Medium Sterilizer

  • Brand: STERIS
  • Key Features: Processes up to fifteen 25lb trays per cycle in the 60" unit
  • Productivity: Fully programmable cycles to satisfy instrument manufacturer processing recommendations

Product Overview

The STERIS Certified Pre-Owned AMSCO 400 Medium Sterilizer (autoclave) is tailored for the rigorous needs of Sterile Processing Departments (SPDs). This medium-sized autoclave can safely sterilize up to 375 lbs. per cycle, enabling efficient management of high-volume sterilization and heavier trays while adhering to compliance standards.

  • Available in three chamber lengths: 36", 48" or 60" chamber
  • Install recessed in the wall or free-standing with cabinet
  • Safe access to all components from the front and left side of the sterilizer
  • Real-time remote monitoring of sterilizer function and cycle parameters with ConnectCare℠
  • Preventive maintenance and comprehensive service agreements

The STERIS Certified Pre-Owned (CPO) AMSCO 400 Medium Sterilizer repaired option undergoes a precise STERIS certification process. STERIS CPO technicians thoroughly inspect and refurbish each unit to provide and ensure it meets STERIS specifications to be like-new aesthetically and operationally.

Go to Top of Page
 

Specifications

The STERIS Certified Pre-Owned AMSCO 400 Medium Steam Sterilizers are available with manual hinged or horizontal-sliding, automated door operation controlled by a touch-screen.

AMSCO® 400 SERIES MEDIUM STERILIZER
WITH MANUAL HINGED DOOR

AMSCO 400 Series Medium Sterilizer with Manual hinged door

AMSCO® 400 SERIES MEDIUM STERILIZER
WITH AUTOMATED HORIZONTAL SLIDING DOOR

AMSCO 400 Series Medium Sterilizer with Automated Horizontal Sliding Door

Interior Chamber Dimensions, available in three chamber lengths:

  • 26 x 37.5 x 36" (660 x 950 x 910 mm) – 570.56 liters
  • 26 x 37.5 x 48" (660 x 950 x 1220 mm) – 764.94 liters
  • 26 x 37.5 x 60" (660 x 950 x 1520 mm) – 953.04 liters
Go to Top of Page
 

Certification Process

STERIS has developed a comprehensive process that replaces all components with new OEM parts, except the framing for the stainless door and the chamber, which is stripped and conditionally painted if needed. Our process extends but is not limited to the following:

  • Re-Insulate Chamber
  • Replace steam manifold
  • Replace heat exchanger Assy
  • Replace jacket trap
  • Replace pressure regulator
  • Replace exhaust manifold
  • Replace the check valve
  • Temperature and pressure calibration
  • Verify door operation
  • Check relays and contactors for arc damage
  • Replace conductivity/ float probes
  • Re-finish all stainless-steel panels or replace them if needed
  • Replace vacuum pump
  • Replace water inlet
  • Replace the safety valve
  • Replace jacket trap check valve
  • Replace the feed water valve
  • Check chamber level sensor
  • Check appearance for leaks and damage
  • Replace chamber strainer
  • Replace steam baffle
Go to Top of Page
 

Literature

There are no literature documents found for this document.
Go to Top of Page
 

Related Products

Go to Top of Page