VERIFY Biological Integrator Challenge Pack | STERIS
STERIS Corporation - Helping to provide a healthier today and a safer tomorrow.

VERIFY Biological/Integrator Challenge Pack

  • Read Time: Provides results in 24 hours
  • Cycles: Dynamic Air Removal Cycles at 270°F/132°C and Gravity Cycles at 250°F/121°C
  • Feature: Type 5 chemical integrator meets ANSI/AAMI/ISO 11140-1 requirements

Shop Now

PRODUCT OVERVIEW

VERIFY Biological/Integrator Challenge Packs are used to monitor dynamic air removal (prevacuum and steam-flush pressure-pulse) steam sterilization cycles performed at 270°F/132°C or gravity cycles performed at 250°F/121°C.

How VERIFY Biological/Integrator Challenge Packs Work

The VERIFY Biological/Integrator Challenge Pack is a preassembled pack consisting of a clear plastic tube with a plastic vented closure at each end. Each challenge pack contains a VERIFY Self-Contained Biological Indicator (SCBI) and a Type 5 chemical integrator, and cotton-filled gauze sponges and foam discs to provide a challenge to the sterilization process.

Check out the new:

Celerity™ 20 STEAM Process Challenge Device

Celerity 20 STEAM Process Challenge Device for fast 20 minute results.

The VERIFY Biological/Integrator Challenge Pack is placed toward the bottom front of the loaded autoclave chamber near the drain. After the cycle has completed, technicians should immediately remove the challenge pack from the sterilizer and allow cooling before interpreting the chemical indicators and incubating the biological indicator for 24-hours before final results are read. See the instructions sheet enclosed in each box for detailed use directions.

Why VERIFY Biological/Integrator Challenge Packs?

These biological integrator challenge packs provide routine monitoring of specific steam sterilization cycles, with a compact design. Additional benefits of the VERIFY Biological/Integrator Challenge Packs include:

  • Type 5 chemical integrator meets ANSI/AAMI/ISO 11140-1 requirements
  • Equivalent to an ANSI/AAMI ST79 16-Towel Biological Indicator Test Pack
Go to Top of Page
 

SHOP NOW

Browse a complete Item Number list and easily reorder VERIFY® Biological/Integrator Challenge Pack products on Shop STERIS.

Product Number Description  
LCB006 VERIFY BI/CI CHALLENGE PACK (20 PKS & 5 CNTRLS/BX)
LCB007 VERIFY BI/CI CHALLENGE PACK(20 PKS & 20 CNTRLS/BX)

An incubator and activator set are required for proper use of the VERIFY Biological/Integrator Challenge Packs.

Product Number Description Quantity  

S3075

VERIFY Vial Activator Set

Each

S3080

VERIFY 28 Well Dual Incubator (55-60°C and 35-39°C)

Each

S3082

VERIFY 28 Well Incubator for Steam (55-60°C)

Each

S3271

VERIFY 6 Well Steam Incubator (55-60°C)

Each

Go to Top of Page
 

Literature

TECH DATA SHEET
Document # Document Title
VERIFY DUAL TEMPERATURE 28-WELL INCUBATOR (220 VAC) FOR VERIFY SELF-CONTAINED BIOLOGICAL INDICATORS (S3081)
VERIFY BIOLOGICAL /INTEGRATOR STEAM CHALLENGE PACK
BROCHURE
Document # Document Title
VERIFY BIOLOGICAL MONITORING PRODUCTS BROCHURE
SAMPLE PROCEDURES
Document # Document Title
SAMPLE PROCEDURE: STEAM STERILIZATION LOAD MONITORING WITH VERIFY SIXCESS CHALLENGE PACKS AND VERIFY BIOLOGICAL/INTEGRATOR CHALLENGE PACK
MSDS
Document # Document Title
VERIFY SCBI AND TEST PACKS - ITALIAN
VERIFY SCBI AND TEST PACKS - PORTUGUESE
VERIFY SCBI AND TEST PACKS - UNITED KINGDOM
SDS
Document # Document Title
VERIFY BIOLOGICAL/INTEGRATOR CHALLENGE PACK
Go to Top of Page
 

Related Products

Go to Top of Page